지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2014.4
- 수록면
- 24 - 29 (6page)
이용수
초록· 키워드
오류제보하기
In general, a large-capacity axial flow fan is used for industrial processes or ventilation in a social overhead capital infrastructure. The main characteristics of the large axial-flow fan need a lot of electrical power consumption and operate 24 hours a day, 365 days a year. Since the large axial flow fan consumes several hundreds to thousands kW per hour, both manufacturer and consumer are struggling to select high efficiency products for saving energy and reducing operation cost. Therefore, the performance testing should be accurately conducted in experimental equipments. The performance estimation and uncertainty of measurement of the axial-flow fan gathered from the result from nozzle shaped testing equipments certified with ANSI/AMCA standard and duct shaped testing equipment under the same experimental condition. The experimental results from both facilities have maximum 17% differences in performance evaluation and uncertainty of measurement. As considering that the differences, it is doubt about the reliability of testing result. The test was repeated with the specific term during 12 months because it is important to fully reflect the real conditions and to decide the repeatability of data. The evaluation of duct type testing facilities was failed to get an uncertainty measure. Testing results were previously published. As a series of previous paper, axial fan (?1690 mm) and duct type testing facilities were fabricated. The purpose of fabricating testing equipment was testing an uncertainty measurement under the controlled environments.
목차
ABSTRACT
1. Introduction
2. Testing facilities and calibration
3. Testing Method
4. Conclusion
REFERENCES
참고문헌 (7)
참고문헌 신청
1. [학술대회논문] - Ko, H.-H. / 2012 / An Evaluation of Performance Test and Uncertainty of Measurement for a Large Axial-flow Fan Based on ANSI/AMCA 210 Standard / Proceedings of 2012 Annual Meeting of KFMA
2. [기타자료] - / / ANSI/AMCA Standard 210, 2008, Laboratory Methods of Testing Fans for Certified Aerodynamic Performance Rating / Air Movement and Control Association International, Inc.
3. [인터넷자원] - AMCA International Inc / / Accredits Laboratory for Korea Machinery-meter and Petrochemical Testing and Rearch Institute
4. [인터넷자원] - / / http://www.kolas.go.kr
5. [인터넷자원] - International Standard / / ISO/IEC 17025-2005(E), General requirements for the competence of testing and calibration laboratories
2. [기타자료] - / / ANSI/AMCA Standard 210, 2008, Laboratory Methods of Testing Fans for Certified Aerodynamic Performance Rating / Air Movement and Control Association International, Inc.
3. [인터넷자원] - AMCA International Inc / / Accredits Laboratory for Korea Machinery-meter and Petrochemical Testing and Rearch Institute
4. [인터넷자원] - / / http://www.kolas.go.kr
5. [인터넷자원] - International Standard / / ISO/IEC 17025-2005(E), General requirements for the competence of testing and calibration laboratories
이 논문의 저자 정보
이 논문과 함께 이용한 논문
실내 환경에서 2D-LiDAR Sensor를 이용한 쿼드로터 장애물 회피 시스템
심지섭
,
이기수
,
김성관
외 1명
대한전기학회 학술대회 논문집
2017
.07
LiDAR Point Cloud에 부분평균 알고리즘을 적용한 교차로 인식 방법
임도영
,
박진배
대한전기학회 학술대회 논문집
2017
.07
2차원 라이다 기반 3차원 포트홀 검출 시스템
김정주
,
강병호
,
최수일
디지털콘텐츠학회논문지
2017
.08
3D 프린팅용 티타늄 분말의 제조공정 및 시장동향
황준호
대한용접·접합학회지
2017
.08
자율주행 자동차 환경에서의 운전자 경험에 대한 연구 : 신뢰와 불신 형성 모형 중심으로
이지인
,
김나은
,
김진우
디지털콘텐츠학회논문지
2017
.07
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2015-550-001441429