메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
정태훈 (전북대학교) Reza Alidoost Dafsari (전북대학교) Foad Vashahi (전북대학교) 이지근 (전북대학교)
저널정보
한국자동차공학회 한국자동차공학회 추계학술대회 및 전시회 2016년 한국자동차공학회 추계학술대회 및 전시회
발행연도
2016.11
수록면
126 - 131 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this study, a numerical simulation has been performed to investigate the flow characteristics of the specially designed pressure swirl nozzle. The commercial CFD code, Star-CCM, was used to simulate the internal flow behavior. The nozzle tested has the ability of modifying the swirl chamber length in accordance with the desired application. Therefore, the spray pattern changes from a hollow cone with wider angle to a full cone and narrower spray from minimum to maximum swirl chamber length, respectively. Distances of swirl chamber were varied, from 1.7mm to 3.7mm, with the intervals of 0.5mm. Flow structure for each configuration was analyzed and the compared with other cases. It was found that the velocity patterns including axial, radial and tangential components were affected by the change in the swirl chamber length in terms of peaks and radial distribution. However, the magnitude of discharge velocity was remained fairly constant.

목차

Abstract
1. 서론
2. 연구 이론 및 방법
3. 결과 및 고찰
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2017-556-002271614