지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2018.6
- 수록면
- 38 - 45 (8page)
이용수
초록· 키워드
오류제보하기
In this study, the theory of fluid mechanics and dynamics is used to build a mathematical model for a three-stage flow control valve. The significance of the study is that the mathematical model can easily be used to study the effect of different design parameters on the performance of the valve. The geometry of the valve and the properties of the fluid were used in this study to determine the variation in the performance of the valve when varying the magnetic force on the pilot spool. While a linearization technique is not used to solve the developed model, the solution of the mathematical model is found in the time domain by simulation of the equations using a software package. The results indicate that if the developed mathematical model is solved for the different values of magnetic force, the valve behaves linearly; the valve is thus called the proportional flow control valve.
목차
1. Introduction
2. Working of the Valve
3. Mathematical Modeling
4. Results and Discussion
5. Conclusion
References
참고문헌 (8)
참고문헌 신청
[단행본] - E. M. Herbert / 1967 / Hydraulic Control Systems / John Wiley and Sons
[학술지(정기간행물)] - K. Liu / 2016 / Energy-saving analysis of the independent metering system with pressure compensation for excavator's manipulator / Journal of Systems and Control Engineering, Proc IMechE Part I : 1 ~ 16
[학술지(정기간행물)] - 최규정 / 2015 / Energy-saving in excavators with application of independent metering valve / Journal of Mechanical Science and Technology 29 (1) : 387 ~ 395
[학술지(정기간행물)] - S. A. Nahian / 2015 / Introduction of Independent Metering Valve for Energy Saving Excavator System / Journal of Drive and Control 12 (1) : 45 ~ 52
[학술대회논문] - J. D. Zimmerman / 2007 / Energy Consumption Of An Ls Excavator Hydraulic System / ASME 2007 International Mechanical Engineering Congress and Exposition 4 : 117 ~ 126
[학술지(정기간행물)] - K. Liu / 2016 / Energy-saving analysis of the independent metering system with pressure compensation for excavator's manipulator / Journal of Systems and Control Engineering, Proc IMechE Part I : 1 ~ 16
[학술지(정기간행물)] - 최규정 / 2015 / Energy-saving in excavators with application of independent metering valve / Journal of Mechanical Science and Technology 29 (1) : 387 ~ 395
[학술지(정기간행물)] - S. A. Nahian / 2015 / Introduction of Independent Metering Valve for Energy Saving Excavator System / Journal of Drive and Control 12 (1) : 45 ~ 52
[학술대회논문] - J. D. Zimmerman / 2007 / Energy Consumption Of An Ls Excavator Hydraulic System / ASME 2007 International Mechanical Engineering Congress and Exposition 4 : 117 ~ 126
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Modeling and Simulation of an EPPR Valve Coupled with a Spool Valve
드라이브·컨트롤
2019 .06
-
Modeling and Experimental Performance Results of a Three-stage Proportional Flow Control Valve
유공압건설기계학회 학술대회논문집
2017 .11
-
A Study on the Comparison of Loss Coefficient by 1-inch Ball and Glove Valve Opening Ratio
한국기계가공학회지
2021 .09
-
Development of Life Test Equipment with Real Time Monitoring System for Butterfly Valves
International Journal of Fluid Machinery and Systems
2017 .03
-
내부 파일럿 작동식 유량 제어밸브의 성능에 관한 연구
유공압건설기계학회 학술대회논문집
2016 .06
-
Controller Design of a Nozzle-flapper Type Servo Valve with Electric Position Sensor
유공압건설기계학회 학술대회논문집
2018 .11
-
3단 비례유량제어밸브의 특성 해석
한국생산제조학회 학술발표대회 논문집
2017 .12
-
Characteristics of Compacted Two Stage Relief Valve with Damping Orifice between Main Valve and Pilot Valve
유공압건설기계학회 학술대회논문집
2015 .10
-
Investigation of Reliability of an Electro-Hydraulic Pressure Reducing Valve through Experiments
유공압건설기계학회 학술대회논문집
2020 .07
-
Steady State Pressure and Flow Characteristics of a Pin-type Electro-hydraulic Pressure Reducing Valve and Its Relation with the Spring Constant
한국정밀공학회 학술발표대회 논문집
2021 .05
-
A Study on the Efficient Flow Analysis due to Valve Shape
한국기계가공학회지
2020 .06
-
전산유체역학 해석을 이용한 글로브밸브의 유량계수와 유동힘에 대한 연구
한국전산유체공학회지
2024 .12
-
압축성 유체용 글로브 밸브의 유량특성 향상에 관한 연구
드라이브·컨트롤
2019 .12
-
가스 파이프라인용 볼 밸브 내부유동의 실험적 연구
한국수소및신에너지학회논문집
2016 .06
-
반도체 Wafer 공정용 불산 제어 밸브 모듈 개발에 관한 연구
한국기계기술학회지
2022 .08
-
구조해석을 이용한 공압식 앵글밸브의 형상 최적설계
동력시스템공학회지
2020 .10
-
수치해석을 통한 배플이 추가된 버터플라이 밸브의 성능 예측
동력시스템공학회지
2019 .06
-
Performance Testing of a 3-port Pressure Control Valve
유공압건설기계학회 학술대회논문집
2021 .07
-
비례감압밸브 구동 유량제어밸브의 동특성
한국정밀공학회 학술발표대회 논문집
2020 .09
-
Valve core shapes analysis on flux through control valves in nuclear power plants
Nuclear Engineering and Technology
2020 .10
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2018-550-002220144