메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
문건호 (서울과학기술대학교) 최민수 (서울과학기술대학교) 강병현 (서울과학기술대학교) 이상철 (서울과학기술대학교) 김시희 (서울과학기술대학교) 정현준 (한밭대학교) 윤린 (한밭대학교) 박창용 (서울과학기술대학교)
저널정보
대한설비공학회 설비공학논문집 설비공학논문집 제35권 제6호
발행연도
2023.6
수록면
265 - 274 (10page)
DOI
10.6110/KJACR.2023.35.6.265

이용수

DBpia Top 5%동일한 주제분류 기준으로
최근 2년간 이용수 순으로 정렬했을 때
해당 논문이 위치하는 상위 비율을 의미합니다.
표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The power consumption of pumps in a hydrothermal heat pump system is important from environmental and economic points of view. In this study, an office building and a hydrothermal heat pump system were modeled by the TRNSYS 18 program, and building load and energy consumption were simulated. The variation in pump power consumption was analyzed according to changes in the design parameters for heat source-side piping in the heat pump system. The system consisted of a heat pump, pumps, heat exchangers, and a fan coil unit. The flow rate and power consumption of the pumps and the fan were calculated by the system operating time to satisfy the building load. A simulation was performed by changing the horizontal distance to the hydrothermal source from 200 m to 1000m, vertical height differences from 2 m to 10 m, and pipe diameters from 0.1 m to 0.3 m. The intake pump (Pump A) power consumption ratio to total power consumption increased from 6.5% to 11.7% with increases in the distance to the hydrothermal source. The simulation results showed that the pipe diameter had a great influence on the power consumption of the pump.

목차

Abstract
1. 서론
2. 연구방법
3. 시뮬레이션 결과
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0